📻onocoy service levels

Nearest

In our current deployment, you will connect to the mountpoint called NRBY_ADV.

Key features

NRBY_ADV is a roaming mountpoint. That means:

  • Your rover receiver will automatically connect to the nearest station

  • It will only connect to those stations fulfilling your signal band requirements

    • For example, if you choose signal Galileo E5 as a must for you, you will only receive correction data from base stations tracking E5.

  • If you move further than 20 km from the original base station and another suitable station is closer, the receiver will automatically change the base station to the closer one.

Some technical facts

  • Applications: Agriculture, Surveying, Construction, UAV, Robotics, Autonomous vehicles

  • Mode: Access to the nearest reference station including handover and fallback

  • Correction sock type: NTRIP 1.0 / 2.0 HTTP

  • Supported GNSS constellations: GPS, Galileo, BeiDou, GLONASS, QZSS, NavIC

  • Frequency bands: L1, L2, L5 & E6 where available

  • Correction data format: RTCM 3.x MSM4 or higher

  • Position accuracy: 1 centimeter + 1 part per million of the rover to base baseline length

  • Multiple simultaneous NTRIP clients supported: yes

  • TCP ports supported: 2101 unencrypted, 2121 TLS encrypted

Permanent

Permanent mode is coming soon!

Previousonocoy RTK – Get GNSS correction dataNextONO Token

Last updated